System Function - Alaxala AX1250S Software Manual

system function

system function
Configures the distribution of system functional resources for a Switch. This setting applies
to the following:

DHCP snooping

IGMP snooping

MLD snooping

Filters

QoS

Extended authentication functionality
- Common to all authentication modes: Authentication IPv4 access list
- IEEE 802.1X: Port-based authentication (dynamic)
- Web authentication: Fixed VLAN mode, dynamic VLAN mode, and Web
authentication IP address
- MAC-based authentication: Fixed VLAN mode and dynamic VLAN mode
This command changes the distribution pattern of the system function resources for each
Switch (called system resources hereafter). Changing the distribution pattern according to
the operation mode allows you to gather system resources in the necessary tables so that
they can be used.
Because this command is used to configure the basic operating conditions of the system,
make sure you set this command during the first stage of actual operation. We recommend
that you do not change the distribution pattern during operation.
Input format
To set or change information:
system function [ filter ] [ qos ] [ igmp-snooping ] [ mld-snooping ]
[ dhcp-snooping ]
To delete information:
no system function
Input mode
(config)
Parameters
Sets the system resource distribution pattern. For details about distribution patterns, see 9.
Switch Management in the Configuration Guide Vol. 1.
filter
The filtering functionality is used.
1.
2.
48
[extended-authentication ]
Default value when this parameter is omitted:
The filtering functionality cannot be used.
Range of values:
None