Table of Contents
Advertisement
axrp-ring-port
Sets an interface that operates as the ring port for the Ring Protocol. The interfaces that can
be set are Ethernet interfaces and port channel interfaces.
Input format
To set information:
axrp-ring-port
To delete information:
no axrp-ring-port
Input mode
(config-if)
Parameters
<Ring ID>
Sets a ring ID.
1.
2.
shared
When a Switch operates as a transit node on a shared link, this parameter sets the
ring port that will be the shared link.
Two ports must be set for the ring ID.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<Ring ID>
<Ring ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 65535
Default value when this parameter is omitted:
The interface operates as a standard ring port.
Range of values:
None
[shared]
axrp-ring-port
217
Advertisement
Table of Contents
