Table of Contents
Advertisement
Command mode list
The following table lists the command modes.
Table 1-1 Command mode list
Item
Command mode
No.
name
(config)
1
(config-line)
2
(config-if)
3
(config-if-range)
4
(config-vlan)
5
(config-mst)
6
(config-axrp)
7
(config-ext-macl)
8
(config-std-nacl)
9
(config-ext-nacl)
10
(config-mac-qos)
11
(config-ip-qos)
12
(config-group)
13
(dhcp-config)
14
(config-ether-cfm
15
)
(config-auto-cf)
16
(config-netconf)
17
Description
Global configuration mode
Configures remote login.
Configures an interface.
Configures multiple interfaces.
Configures a VLAN.
Configures a multiple spanning
tree configuration.
Configures the Ring Protocol.
Configures a MAC filter.
Configures an IPv4 address
filter.
Configures an IPv4 packet
filter.
Configures MAC QoS.
Configures IPv4 QoS.
Configures a RADIUS server
group.
Configures a DHCP server.
Configures the domain name
and MA.
Configures AUTOCONF.
Configures NETCONF.
Mode transition command
> enable
# configure
(config)# line vty
(config)# interface
(config)# interface range
(config)# vlan
(config)# spanning-tree mst
configuration
(config)# axrp
(config)# mac access-list
extended
(config)# ip access-list
standard
(config)# ip access-list
extended
(config)# mac qos-flow-list
(config)# ip qos-flow-list
(config)# aaa group server
radius
(config)# ip dhcp pool
(config)# ethernet cfm domain
(config)# auto-config
(config)# netconf
Command mode list
3
Advertisement
Table of Contents
