Table of Contents
Advertisement
permit (ip access-list extended)
dscp
<DSCP>
This parameter sets the DSCP value, which is the first six bits in the ToS field.
Its value is compared with the first six bits in the ToS field of the received packet.
1.
2.
ack
Sets detection of packets whose ACK flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
fin
Sets detection of packets whose FIN flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
psh
Sets detection of packets whose PSH flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
rst
Sets detection of packets whose RST flag in the TCP header is 1.
This parameter is an option available only when the protocol is TCP.
1.
2.
308
Precedence names that can be specified.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
Set 0 to 63 (in decimal) or the DSCP name.
For details about the DSCP names that can be set, see Table 19-6 DSCP
names that can be specified.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
Advertisement
Table of Contents
