Show Shaper <Port List - Alaxala AX6700S Software Manual
Operation command reference vol. 2
for version 11.7
Hide thumbs
Also See for AX6700S:
- Troubleshooting manual (305 pages) ,
- Troubleshooting manual (324 pages)
Table of Contents
Advertisement
4. QoS
show shaper <port list>
Outputs statistics for a hierarchical shaper of the specified Ethernet interface.
Displays the following to monitor the traffic status:
• Port buffer information.
• Number of output or discarded packets in output queues, number of output or discarded bytes,
queue length, and communication rate.
Syntax
For AX6700S and AX6600S series switches:
show shaper
[{ all | discard-mode | rate }]
For AX6300S series switches:
show shaper
| rate }]
Input mode
User mode and administrator mode
Parameters
<port list>
Specify the port number in list format. For the ports specified in the list, displays information
about one or more associated queues. For details about how to specify <port list> and the
specifiable range of values, see Specifiable values for parameters.
user <user id list>
Displays statistics for the specified user ID.
<user id list>
Multiple user IDs can be specified by using a hyphen (-) or a comma (,).
You can also specify one user ID, as when <user id> is written as the parameter input
format.
If a hyphen (-) or a comma (,) is used, the specifiable range is user ID values set in the
configuration.
For AX6700S and AX6600S, the specifiable range of user IDs is from 1 to 1023.
For AX6300S, the specifiable range of user IDs is from 1 to 511.
If VLAN user mapping is used, specify the VLAN ID.
Example of a range specification that uses a hyphen (
1-3,5,10
default-user
Displays statistics of the default user.
llrlq1 [AX6700S] [AX6600S]
Displays statistics for llrlq1.
llrlq2 [AX6700S] [AX6600S]
Displays statistics for llrlq2.
88
<port list>
<user id list>
[ user
<port list>
<user id list>
[ user
][ default-user ][ llrlq1 ][ llrlq2 ]
][ default-user ] [{ all | discard-mode
) and commas (
-
):
,
Advertisement
Table of Contents
