Table of Contents
Advertisement
spanning-tree vlan port-priority
Sets the priority for the applicable PVST+ ports.
Input format
To set or change information:
spanning-tree vlan
To delete information:
no spanning-tree vlan
Input mode
(config-if)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the specified VLAN.
1.
2.
<Priority>
Sets the port priority. Use a multiple of 16 as the port priority. The lower the priority
value, the higher the priority.
1.
2.
3.
Default behavior
The setting of the
spanning-tree port-priority
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<VLAN ID list>
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 240
Notes on using this parameter:
Changing the port priority might change the topology.
spanning-tree port-priority
command has not been set, 128 is set as the port priority.
port-priority
<Priority>
port-priority
<VLAN ID list>
and the specifiable values, see
command is used. If the
spanning-tree vlan port-priority
207
Advertisement
Table of Contents
