Table of Contents
Advertisement
spanning-tree vlan
spanning-tree vlan
Configures PVST+. If the
spanning-tree single
single spanning tree.
Input format
To set or change information:
no spanning-tree vlan
To delete information:
spanning-tree vlan
Input mode
(config)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the specified VLAN.
1.
2.
3.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
vlan
194
no spanning-tree vlan
command has been set, the applicable VLAN operates subject to a
<VLAN ID list>
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Notes on using this command
If the
spanning-tree single
operate in PVST+ mode.
command is set when the
<VLAN ID list>
and the specifiable values, see
command has been set, VLAN1 does not
Advertisement
Table of Contents
