Table of Contents
Advertisement
interface port-channel
Sets an item related to a port channel interface. Entering this command switches to config-if
mode, which allows you to set the configuration command for specifying the channel group
number. A port channel interface is automatically generated when the
command is set.
Input format
To set or change information:
interface port-channel
To delete information:
no interface port-channel
Input mode
(config)
Parameters
<Channel group#>
Sets the channel group number.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
If you want to delete this command, do so after executing the
all ports in the applicable channel group.
Related commands
interface fastethernet
interface gigabitethernet
interface range
<Channel group#>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters.
<Channel group#>
interface port-channel
channel-group mode
shutdown
command for
109
Advertisement
Table of Contents
