Table of Contents
Advertisement
ip arp inspection vlan
Sets the VLAN used for dynamic ARP inspection when the DHCP snooping functionality is
enabled on a Switch.
Input format
To set or change information:
ip arp inspection vlan {
ID
list>}
To delete information:
no ip arp inspection vlan
Input mode
(config)
Parameters
<VLAN ID list>
Sets the IDs of the VLANs used for dynamic ARP inspection.
1.
2.
add
<VLAN ID list>
Adds the IDs of VLANs that will be used for the dynamic ARP inspection to the VLAN
list.
1.
2.
remove
<VLAN ID list>
Removes the IDs of the VLANs used for dynamic ARP inspection from the VLAN list.
1.
2.
Default behavior
The dynamic ARP inspection functionality is not used.
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
| add
<VLAN ID list>
<VLAN ID list>
and the specifiable values, see
<VLAN ID list>
and the specifiable values, see
<VLAN ID list>
and the specifiable values, see
ip arp inspection vlan
| remove
<VLAN
233
Advertisement
Table of Contents
