Table of Contents
Advertisement
interface gigabitethernet
interface gigabitethernet
Sets items related to 10BASE-T/100BASE-TX/1000BASE-T, 100BASE-FX, and
1000BASE-X lines. Entering this command switches to config-if mode in which information
about the relevant line can be set.
Input format
To set or change information:
interface gigabitethernet
Input mode
(config)
Parameters
<IF#>
Sets the interface port number.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
None
Notes
1.
The port name is
Example: The name of the 0/25 port will be
2.
This command cannot be deleted.
Related commands
None
82
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters.
gigabitethernet
<IF#>
+
<Interface port
number>.
gigabitethernet 0/25
.
Advertisement
Table of Contents
