mac-authentication system-auth-control
mac-authentication system-auth-control
Enables MAC-based authentication.
Note that if the
MAC-based authentication stops.
Input format
To set information:
mac-authentication system-auth-control
To delete information:
no mac-authentication system-auth-control
Input mode
(config)
Parameters
None
Default behavior
MAC-based authentication is not performed.
Impact on communication
If
no mac-authentication system-auth-control
authenticated terminals is canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
See Configuration commands and MAC-based authentication modes for the
authentication mode in which the command's settings are operable.
2.
If
no mac-authentication system-auth-control
registered in the internal MAC-based authentication database is saved in its current
state.
Related commands
None
550
no mac-authentication system-auth-control
command is executed,
is executed, the authentication of the
is executed, terminal information