logging facility
logging facility
Sets the facility to output the log information through the syslog interface.
Input format
To set or change information:
logging facility
To delete information:
no logging facility
Input mode
(config)
Parameters
<Facility>
Sets the facility for syslog.
1.
2.
Default behavior
local0
is used as the facility.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
The facility set by using this command is applied to all output destinations set by
using the
Related commands
logging host
642
<Facility>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Set
local0
,
local1
,
local2
logging host
command.
,
local3
,
local4
,
local5
,
local6
, or
local7
.