Table of Contents
Advertisement
radius-server host
Configures the general RADIUS server used for authentication.
Input format
To set or change information:
radius-server host
[timeout
To delete information:
no radius-server host
Input mode
(config)
Parameters
<IP address>
Sets the IPv4 address of the RADIUS server.
1.
2.
<String>
key
Sets the RADIUS key used for encryption or for authentication of communication with
the RADIUS server. The same RADIUS key must be set for the client and the
RADIUS server.
1.
2.
auth-port
Sets the RADIUS server port number.
1.
2.
<IP address>
<Seconds>
] [retransmit
<IP address>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Sets the IPv4 address (dot notation).
1.0.0.0-126.255.255.255, 128.0.0.0-223.255.255.255
Default value when this parameter is omitted:
The RADIUS key set by using
RADIUS server is disabled.
Range of values:
Specify a character string that is no more than 64 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
<Port>
Default value when this parameter is omitted:
Port number 1812
Range of values:
1
to
65535
[auth-port
<Port>
]
<Retries>
] [key
<String>
radius-server key
is used. If no key is set, the
radius-server host
[acct-port
<Port>
]
]
29
Advertisement
Table of Contents
