logging event-kind
Sets the event type of the log information to be sent to the syslog server. Multiple event
types can be set.
Input format
To set or change information:
logging event-kind
To delete information:
no logging event-kind
Input mode
(config)
Parameters
<Event kind>
Sets the event type of the log information to be output.
1.
2.
Default behavior
evt
or
err
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
The event type set by using this command is applied to all output destinations set by
using the
2.
If the event type is set by using this command, the default event types (
become invalid and only the event types that have been set take effect.
Related commands
logging host
<Event kind>
<Event kind>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Set
key
,
rsp
,
err
, or
is set as the event type.
logging host
command.
evt
.
logging event-kind
evt
and
err
)
641