Alaxala AX1250S Software Manual page 707

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

Message
web-auth : Relations between
user-group or authentication
list configuration(s) and
legacy mode configuration(s)
are inconsistent.
Table 36-22 Web authentication error messages (internal DHCP server setting)
Message
Can not delete it because data is
not corresponding.
Interface not found.
Invalid network.
ip
[<VLAN
ID>]: Can't delete IP
configuration with dhcp
configuration.
It exceeded maximum number of
IP-address pool.
Maximum number of entries are
already defined.
<DHCP-EXCLUDED-ADDRESS>
Maximum number of entries are
already defined.
<DHCP-IF>
Maximum number of entries are
already defined.
<DHCP-POOL>
network conflicts.
vlan
[<VLAN
ID>]: Can't delete
vlan configuration referred by
other.
Explanation
web-authentication vlan
The
because the authentication method for each user ID or the
port-based authentication method is set.
Delete the following:
dot1x authentication
web-authentication authentication
web-authentication user-group
mac-authentication authentication
Explanation
The specified setting cannot be deleted because it does not exist.
No VLANs or IP addresses are set. Revise the VLAN and IP
settings.
The network configuration is invalid.
The IP cannot be deleted or changed because it is being used by the
DHCP server configuration.
<VLAN
ID>: VLAN ID
The maximum number of IP address pools has been exceeded.
Revise the network configuration and excluded address settings.
The maximum number of specifiable excluded addresses has been
exceeded.
The maximum number of specifiable interfaces has been exceeded.
The maximum number of specifiable pools has been exceeded.
Network settings have been duplicated.
The VLAN cannot be deleted because it is being used by the DHCP
server configuration.
<VLAN
ID>: VLAN ID
command cannot be set
Index
683

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents