Table of Contents
Advertisement
http-server [OP-WOL]
Enables the HTTP server functionality.
Input format
To set information:
http-server
To delete information:
no http-server
Input mode
(config)
Parameters
None
Default behavior
When the
When the
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When this command has been set, display of the Secure Wake-on-LAN user
authentication screen and Web authentication Login page can be enabled.
2.
When the
display of the Secure Wake-on-LAN user authentication screen and Web
authentication Login page can be enabled.
3.
When the
operation of the Web authentication functionality is also enabled. Therefore, when
using the Secure Wake-on-LAN user authentication screen only, set the
http-server
4.
If both this command and the
command have been set, operation of the Secure Wake-on-LAN functionality is not
affected. The following table explains the combinations of command settings.
web-authentication system-auth-control
web-authentication system-auth-control
web-authentication system-auth-control
web-authentication system-auth-control
command.
command is set:
command is not set:
web-authentication system-auth-control
http-server [OP-WOL]
Enabled
Disabled
command has been set,
command has been set,
563
Advertisement
Table of Contents
