Table of Contents
Advertisement
Message
set.
dot1x(xxxxx): Cannot set "dot1x
multiple-authentication"
because force-mode is set now.
dot1x(xxxxx): Cannot set "dot1x
port-control force" command
because sub-mode is
multiple-authentication.
dot1x(xxxxx): Cannot set "dot1x
port-control" because
switchport mode is not
access-mode.
dot1x(xxxxx):Cannot set "dot1x
port-control force" because
switchport mode is mac-vlan
mode.
dot1x(xxxxx): Cannot set "dot1x
supplicant-detection disable"
because ignore-eapol-start is
set now.
dot1x(xxxxx): Cannot set "no
dot1x reauthentication" because
ignore-eapol-start is set now.
dot1x(vlan dynamic): Cannot set
"dot1x vlan dynamic enable"
because authentication list or
user-group is set.
Explanation
Terminal authentication mode cannot be set because the
interface is in force-unauthorized mode or force-authorized mode.
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
force-unauthorized
set because the
xxxxx
interface is in terminal authentication mode.
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
Port-based authentication cannot be set because the switch port
mode of the
xxxxx
interface is not access mode.
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
Force-unauthorized or force-authorized mode cannot be set
because the switch port mode of the
port-channel
<IF#>
or
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
Terminal detection mode cannot be disabled because the
functionality for suppressing the re-authentication of requests from a
terminal on the
xxxxx
interface is set.
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
The re-authentication request functionality cannot be disabled
because the functionality for suppressing the re-authentication of
requests from a terminal on the
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
dot1x vlan dynamic enable
The
because the authentication method for each user ID or the
port-based authentication method is set.
Delete the following:
dot1x authentication
mac-authentication authentication
web-authentication authentication
web-authentication user-group
group#>: Port channel number
force-authorized
or
group#>: Port channel number
group#>: Port channel number
xxxxx
interface
<Channel
group#>) is mac-vlan mode.
group#>: Port channel number
group#>: Port channel number
xxxxx
interface is set.
group#>: Port channel number
command cannot be set
Index
xxxxx
mode cannot be
(ethernet
679
Advertisement
Table of Contents
