Table of Contents
Advertisement
lease
lease
Sets the default lease time of the IP addresses distributed to clients.
Input format
To set or change information:
lease {
To delete information:
no lease
Input mode
(dhcp-config)
Parameters
<Time day>
{
Specify the lease time in days, hours, minutes, and seconds. If this information is not
set, 10 seconds is set as the initial value for the lease time. This information cannot
be set if the total value of
less than 10 seconds. Specify a value from 10 (seconds) to 365 (days).
<Time day>
<Time hour>
<Time min>
<Time sec>
infinite
Default behavior
10 seconds is set as the lease time.
500
<Time day>
[
<Time hour>
<Time hour>
<Time min>
[
[
<Time day> >
Specify the lease time in days.
1.
Range of values:
0 to 365 (days)
Specify the lease time in hours.
1.
Range of values:
0 to 23 (hours)
Specify the lease time in minutes.
1.
Range of values:
0 to 59 (minutes)
Specify the lease time in seconds.
1.
Range of values:
0 to 59 (seconds)
Sets the lease time to unlimited.
[
<Time min>
[
<Time sec>
<Time sec>
[
]]] | infinite}
/
<Time hour>
/
<Time min>
]]] | infinite}
/
<Time sec>
is
Advertisement
Table of Contents
