Alaxala AX1250S Software Manual page 691

Message
axrp-<Ring ID>: maximum number
of ring-id are already
defined.
axrp-<Ring ID>: maximum number
of ring-port are already
defined.
axrp-<Ring ID>: Relations
between uplink redundant and
ring protocol are
inconsistent.
axrp-<Ring ID>: this interface
is already defined as a ring
port of other ring configured
the same vlan-mapping.
axrp-<Ring ID>: vlan
is already configured in
control-vlan of other ring.
axrp-<Ring ID>: vlan
is already configured in
vlan-mapping.
axrp-<Ring ID>: vlan-mapping
is already
<Mapping ID>
configured in vlan-group of
other ring.
Explanation
A maximum of four ring IDs can be used on a Switch. No more than
four ring IDs can be registered.
To add a ring ID, you must first delete a registered ring ID.
<Ring ID>: Ring ID
Set two ring ports for each ring ID.
To set another port as a ring port, first delete a ring port that has
already been set.
<Ring ID>: Ring ID
The uplink redundant functionality has already been set for the
specified interface.
Delete the uplink redundancy functionality or specify another
interface.
<Ring ID>: Ring ID
The specified interface has already been set as a ring port of another
ring to which the same VLAN mapping as the ring set by using this
command is applied.
Set the applicable interface as a shared link or specify another
interface.
<Ring ID>: Ring ID
<VLAN ID> The specified VLAN has already been set in the control VLAN of
another ring.
Either delete the applicable VLAN from the other control VLAN or use
another VLAN.
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
<VLAN ID> The specified VLAN has already been set for VLAN mapping.
Either delete the applicable VLAN from the VLAN mapping or use
another VLAN.
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
The specified VLAN mapping has already been set for a VLAN group
in another ring.
Either delete the VLAN mapping from the other VLAN group or use
other VLAN groups.
<Ring ID>: Ring ID
<Mapping ID>: VLAN mapping ID
Index
667