Table of Contents
Advertisement
traffic-shape rate
traffic-shape rate
Sets the bandwidth by setting port bandwidth control for an interface (physical port) to limit
the send bandwidth.
Input format
To set or change information:
traffic-shape rate {
To delete information:
no traffic-shape rate
Input mode
(config-if)
Parameters
<kbit/s>
rate {
Sets port bandwidth control. Using this functionality limits the total-line send
bandwidth to the set bandwidth.
1.
2.
Table 20-11 Range of port bandwidth control settings
Item No.
Line speed
1
1 Gbit/s
2
100 Mbit/s
3
10 Mbit/s
auto
4
356
<kbit/s>
<Mbit/s>
|
M }
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See the table below.
Bandwidth
64 kbit/s to 1 Gbit/s
64 kbit/s to 100 Mbit/s
64 kbit/s to 10 Mbit/s
64 kbit/s to 1 Gbit/s
|
<Mbit/s>
M }
Setting range
In Mbit/s
1 M to 1000 M
In kbit/s
1000 to 1000000
64 to 960
In Mbit/s
1 M to 100 M
In kbit/s
1000 to 100000
64 to 960
In Mbit/s
1 M to 10 M
In kbit/s
1000 to 10000
64 to 960
In Mbit/s
1 M to 1000 M
In kbit/s
1000 to 1000000
64 to 960
Step value
#1
1 M
#2
100 k
#3
64 k
#1
1 M
#2
100 k
#3
64 k
#1
1 M
#2
100 k
#3
64 k
#1
1 M
#2
100 k
#3
64 k
Advertisement
Table of Contents
