Table of Contents
Advertisement
aaa authentication mac-authentication
Default behavior
Authentication is performed by using the internal MAC-based authentication database
instead of using the RADIUS server.
Impact on communication
When the device default setting is changed, authentication of terminals that had been
authenticated by the corresponding authentication functionality is canceled.
When settings for the authentication method list are changed, authentication of terminals on
ports specifying the corresponding authentication method list is canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All MAC-based authentication settings take effect when the
system-auth-control
2.
See Configuration commands and MAC-based authentication modes for the
authentication mode in which the command's settings are operable.
3.
Enabling of this command requires a separate authentication setting for the RADIUS
server.
4.
The forced authentication functionality for MAC-based authentication operates only
when RADIUS authentication is set. If multiple authentication methods are set, the
forced authentication functionality does not operate.
Related commands
aaa group server radius
mac-authentication system-auth-control
mac-authentication authentication
radius-server host
512
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
command is set.
or
mac-authentication radius-server host
mac-authentication
Advertisement
Table of Contents
