Table of Contents
Advertisement
sets bits that permit an arbitrary value in an IPv4 address.
host
-
The filter condition is a perfect match of
any
-
The destination IPv4 address is not included as a filter condition.
IPv4 address (nnn.nnn.nnn.nnn): 0.0.0.0 to 255.255.255.255
eq
<Dst port>
Sets the destination port number.
This parameter is an option available only when the protocol is TCP and UDP.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
Set 0 to 65535 (in decimal) or a port name.
For details about the port names that can be set, see Table 19-2 Port names
that can be specified for TCP and Table 19-3 Port names that can be specified
for UDP (IPv4).
tos
<TOS>
Sets four bits (bits 3 to 6) in the ToS field as the TOS value.
The TOS value is compared with four bits (bits 3 to 6) in the ToS field of the received
packet.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
Set 0 to 15 (in decimal) or a TOS name.
For details about the TOS names that can be set, see Table 19-4 TOS names
that can be specified.
<Precedence>
precedence
This parameter sets the
field.
Its value is compared with the first three bits in the ToS field of the received packet.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
Set 0 to 7 (in decimal) or the precedence name.
For details about the precedence names that can be set, see Table 19-5
<Dst IPv4>
specification:
specification:
precedence
value, which is the first three bits in the ToS
permit (ip access-list extended)
<Dst
IPv4>.
307
Advertisement
Table of Contents
