Max-Lease - Alaxala AX1250S Software Manual

max-lease

max-lease
Sets the maximum allowable lease time when a client specifies the lease time and requests
an IP address.
Input format
To set or change information:
max-lease {
To delete information:
no max-lease
Input mode
(dhcp-config)
Parameters
<Time day>
{
Specify the lease time in days, hours, minutes, and seconds. If this information is not
set, 10 seconds is set as the initial value for the lease time. This information cannot
be set if the total value of
less than 10 seconds. Specify a value from 10 (seconds) to 365 (days).
<Time day>
<Time hour>
<Time min>
<Time sec>
infinite
Default behavior
The time set by using the
502
<Time day> [ <Time hour>
<Time hour> <Time min>
[ [
<Time day> >
Specify the lease time in days.
1. Range of values:
0 to 365 (days)
Specify the lease time in hours.
1. Range of values:
0 to 23 (hours)
Specify the lease time in minutes.
1. Range of values:
0 to 59 (minutes)
Specify the lease time in seconds.
1. Range of values:
0 to 59 (seconds)
Sets the lease time to unlimited.
lease command is set as the maximum lease time.
[ <Time min> [ <Time sec>
<Time sec>
[ ]]] | infinite}
/ <Time hour> / <Time min>
]]] | infinite}
/ <Time sec> is