Web-Authentication Max-Timer - Alaxala AX1250S Software Manual

web-authentication max-timer

Sets the maximum connection time.
Input format
To set or change information:
web-authentication max-timer {
To delete information:
no web-authentication max-timer
Input mode
(config)
Parameters
<Minute>
{
Sets the maximum time (in minutes) that an authenticated user is allowed to be
connected. After a user has logged in, if the time set by using this command elapses,
the user is automatically logged out.
If infinity
1.
2.
Default behavior
60 minutes is set as the maximum connection time.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the
system-auth-control
2. See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3. If the value for the maximum connection time is either decreased or increased, the
previous setting is applied to a user that is currently authenticated, and the current
setting takes effect only from the next login.
4. The time on the Switch is not used for the connection time for Web authentication.
Accordingly, if the date and time is changed by using the
command, the connection time is not affected.
| infinity}
is set, there is no limit on the connection time.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
10 to 1440 (minutes) or
command is set.
<Minutes> | infinity}
infinity
web-authentication
web-authentication max-timer
set clock operation
461