Table of Contents
Advertisement
rmon alarm
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
To access an alarm group from the SNMP manager, you must register the SNMP
manager by using the
2.
The information identification number is set as the value for
falling-event-index
3.
When setting this command from a console, you must use an object name. If you use
an object ID for setting this command from the SNMP manager, and you execute the
show running-config
displayed.
Related commands
snmp-server host
rmon event
622
snmp-server community
of an event group.
operation command on the console, the object name is
command.
rising-event-index
or
Advertisement
Table of Contents
