Table of Contents
Advertisement
Default behavior
None
Impact on communication
When the device default setting is changed, authentication of terminals that had been
authenticated by the corresponding authentication functionality is canceled.
When settings for the authentication method list are changed, authentication of terminals on
ports specifying the corresponding authentication method list is canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All IEEE 802.1X settings take effect when the
command is set.
2.
See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
3.
If this command is not set, the RADIUS server cannot be used for IEEE 802.1X
authentication.
Related commands
aaa authorization network
aaa group server radius
dot1x authentication
dot1x system-auth-control
radius-server host
or
dot1x radius-server host
aaa authentication dot1x
dot1x system-auth-control
373
Advertisement
Table of Contents
