Table of Contents
Advertisement
schedule-power-control port cool-standby
schedule-power-control port cool-standby
Configures power saving for a port during scheduled power saving.
Input format
To set information:
schedule-power-control port cool-standby
To delete information:
no schedule-power-control port cool-standby
Input mode
(config)
Parameters
None
Default behavior
Operation is at normal power consumption when the port is in the link-down state.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
If this command is set, link-up of the Fast Ethernet port takes about 3 seconds.
Related commands
None
56
Advertisement
Table of Contents
