Linkscan-Mode - Alaxala AX1250S Software Manual

linkscan-mode

linkscan-mode
Sets the operating mode for monitoring the link status of a Switch.
Input format
To set information:
linkscan-mode
To delete information:
no linkscan-mode
Input mode
(config)
Parameters
<Mode>
Sets the operating mode for monitoring the link status.
1.
2.
Default behavior
The link status is monitored by software.
Impact on communication
Because of changes to the operating mode for monitoring the link status, communication
might temporarily stop.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
84
<Mode>
<Mode>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 (The link status is monitored by hardware.)