Spanning-Tree Vlan Transmission-Limit - Alaxala AX1250S Software Manual

spanning-tree vlan transmission-limit

Sets the maximum number of BPDUs that can be sent with the PVST+ hello-time.
Input format
To set or change information:
spanning-tree vlan
To delete information:
no spanning-tree vlan
Input mode
(config)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the specified VLAN.
1.
2.
<Counts>
Sets the maximum number of BPDUs that can be sent per hello-time.
This parameter is effective only when
spanning-tree mode
command. When
spanning-tree vlan
BPDUs that can be sent per second is 3 (fixed) and the setting value of this command
is not referenced.
1.
2.
Default behavior
3 is set as the maximum number of BPDUs that can be sent.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<VLAN ID list>
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
command or the
pvst (802.1D) is set for the
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 10
spanning-tree vlan transmission-limit
transmission-limit
transmission-limit
<VLAN ID list> and the specifiable values, see
rapid-pvst (802.1w) is set for the
spanning-tree vlan
spanning-tree mode
command, the maximum number of
mode
<Counts>
<VLAN ID list> mode
command or the
211