13 Ethernet
13.1 Information common to all Ethernet interfaces
13.1.1 Network configuration example
The figure below shows an example of a typical Ethernet configuration that uses Switches.
The AX2200S series switches for gigabit Ethernet and AX1250S/AX1240S series switches
for fast Ethernet serve as line concentrators which connect the terminals on the floor.
Figure 13-1 Ethernet configuration example
13.1.2 Physical interfaces
There are three types of Ethernet interfaces:
Interface using a 10BASE-T or 100BASE-TX twisted pair cable (UTP) compliant with
IEEE 802.3
Interface using a 10BASE-T, 100BASE-TX, or 1000BASE-T twisted pair cable (UTP)
compliant with IEEE 802.3
Interface using a 100BASE-FX or 1000BASE-X optical fiber cable compliant with
IEEE 802.3
#
154
#
Includes IEEE 802.3ah.