Memory Card Problems; The "Show System" Or "Show Mc" Command Displays "Mc; Mc Not Found." Is Displayed When The Memory Card Is Accessed - Alaxala AX6700S Troubleshooting Manual

3.2 Memory card problems

3.2.1 The "show system" or "show mc" command displays "MC : --------"

If the
show system
take action according to the following table.
Table 3-1 Action to take when "MC : --------" is displayed
No. Items to check and commands
1 Check the ACC LED.
Remove the memory card and
2
insert it again.
3 Replace the memory card.

3.2.2 "MC not found." is displayed when the memory card is accessed

If
MC not found.
check the problem and take action according to the following table.
Table 3-2 Action to take when "MC not found." is displayed
No. Items to check and commands
1 Check the ACC LED.
2 Remove the memory card and
insert it again.
3 Troubleshooting Functional Failures During Operation
or command displays
show mc
Action
If the ACC LED is green, another process might be accessing the
memory card. After the ACC LED turns off, execute the command
again.
If the ACC LED is not green, go to No. 2.
After removing and inserting the memory card, execute the
command again.
Before inserting the memory card, check the memory card and
memory card slot of the Switch for dust. If there is dust, wipe it off
with a dry cloth and insert the memory card.
If you remove and insert the memory card several times but the
problem is not resolved, go to No. 3.
After replacing the memory card, execute the command again.
If replacing the memory card does not resolve the problem, the
memory card slot might have failed.
For AX6700S, AX6600S, or AX6300S series switches:
Replace the BCU, CSU, or MSU.
For AX3800S, AX3600S, or AX2400S series switches:
Replace the Switch.
is displayed when a command that accesses the memory card is executed,
Action
If the ACC LED is green, another process might be accessing the
memory card. After the ACC LED turns off, execute the command
again.
If the ACC LED is not green, go to No. 2.
After removing and inserting the memory card, execute the
command again.
Before inserting the memory card, check the memory card and
memory card slot of the Switch for dust. If there is dust, wipe it off
with a dry cloth and insert the memory card.
If you remove and insert the memory card several times but the
problem is not resolved, go to No. 3.
, check the problem and
MC : --------
27