Command Input Mode; List Of Operation Commands - Alaxala AX2200S Series Configuration Manual

5 Command Operations

5.1 Command input mode

5.1.1 List of operation commands

The following table lists and describes the operation commands related to command input
mode transitions.
Table 5-1 List of operation commands
Command name
enable
disable
exit
logout
configure (configure terminal)
end
5.1.2 Command input mode
To change the configuration or check the status of the Switch, you must move to the
appropriate command input mode, and then enter a configuration command or operation
command. From the CLI prompt, you can tell which command input mode you are in.
The following table describes the correspondences between command input modes and
CLI prompts.
Table 5-2 Correspondences between command input modes and CLI prompts
Command input mode
User mode
Administrator mode
Configuration command mode
The following figure provides an overview of mode transitions.
48
Description
Changes the command input mode from user mode to administrator
mode.
Changes the command input mode from administrator mode to user
mode.
Ends the current command input mode.
Logs out from the switch.
Changes the command input mode from administrator mode to
configuration command mode, and starts configuration editing.
Ends configuration command mode and returns you to administrator
mode.
Executable command
Operation commands (Some commands, such as
configure, can be executed in administrator mode
only.)
Configuration commands
Prompt
>
#
(config)#