Overview Of The Command Input Modes - Alaxala AX6300S Quick Start Manual

3. Required Operations When Installing a Switch

3.1 Overview of the command input modes

The command line interface (CLI) for this Switch has three command input modes:
user mode, administrator mode, and configuration command mode.
It is necessary to properly enter the command input mode in order to set or change
the configuration and to determine the status of the Switch.
Each command input mode has its own properties as shown below. For details
about how to access and exit the command input modes, see Table 3-1 Command
input modes.
Table 3-1 Command input modes
Command Mode transition
input mode command
User mode
login:
<user-ID>
Administrator
> enable
mode
Configuration
# configure
command mode
User mode
After a user logs in, the Switch is in user mode.
In this mode, most operation commands can be executed. The
command, which is used to register a new user account, delete a user account, and
switch to configuration command mode, cannot be executed in user mode, and
must be executed in administrator mode.
Administrator mode
By typing the
mode.
In administrator mode, you can use all operation commands.
Initially, no password is set for the
password for the
mode.
18
Prompt
>
#
(config)
#
command in user mode, the Switch enters administrator
enable
enable
command and limit the users who can use administrator
enable
Exit Description
command
Operation commands other than
> logout
some commands, such as the
configure
command, can be used.
All operation commands can be
# disable
used.
All configuration commands can
(config)#
exit be used.
command. To ensure security, set a
or
adduser
configure