Changes In Configuration Command Reference (For Ver. 2.2) (Ax1240S-S003-30X) - Alaxala AX1250S Series Manual

AX1240S-AP-0202C_R2X
(config-vlan)# exit
Sets a MAC address of a terminal excluded from authentication (MAC address of shared server:
1234.5600.e001 in the figure) to MAC VLAN ID 200.
2.
(config)# interface fastethernet 0/5
(config-if)# switchport mode mac-vlan
(config-if)# switchport mac vlan 200
(config-vlan)# exit
Specifies MAC VLAN ID 200 to which the excluded terminal belongs for an authentication port.
3.
(config)# mac-address-table static 1234.5600.e001 vlan 200 interface fastethernet
0/5
Sets the MAC address (MAC address of shared server: 1234.5600.e001 in the figure) of a terminal
permitted to connect but exempt from authentication with port 0/5 in MAC VLAN ID 200 to the MAC
address table.
Note
Before adding the terminal excluded from authentication to the MAC address table, set the VLAN ID of
MAC VLAN to the port to which the terminal belongs.
3. Changes in Configuration Command Reference (for
Ver. 2.2) (AX1240S-S003-30X)
4. Login Security and RADIUS
(1) aaa authentication login [Change]
Descriptions of parameters and the notes have been corrected as follows. [Ver. 2.2.E and later]
Before the change:
Parameters:
<method> <method>
[
Specify the following parameters for <method>. You cannot specify the same
group radius
RADIUS authentication is used.
local
Local password authentication is used.
Notes:
None
After the change:
Parameters:
<method>
default
Specify the following parameters for <method>. You cannot specify the same
group radius
RADIUS authentication is used.
General-purpose RADIUS servers are used.
local
Local password authentication is used.
]
<method>
[ ]
22
<method> more than once.
<method> more than once.