Switching Intercom Permission On/Off - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
InterCom Announcement/Handsfree

Switching InterCom Permission On/Off

##011: Initiates an InterCom announcement.
##012: Initiates InterCom handsfree.
3. Enter the internal phone number of the system telephone. The following entries are
possible:
** and internal telephone number of the individual system telephone (If
you do not use a direct exchange line access, omit the **.)
The system telephone automatically takes the call after a single ring.
Switching InterCom Permission On/Off
If InterCom permission is enabled, InterCom announcement or InterCom handsfree is enabled
on the InterCom destination in question.
Switching this on/off can be done as follows:
• Separately for subscribers
• Via the configuration manager
• On the system telephone COMfortel 1100/1500/2500/2500 AB/VoIP 2500 AB using the
menu/function key (see the telephone manual)
Requirements:
– Configuration manager, opened with sufficient authorization
– System telephone COMfortel 1100/1500/2500/2500 AB/VoIP 2500 AB
– Internal S port (only provided on the COMpact S
0
available as an option) or internal VoIP channels (COMpact 3000 VoIP or acquired in the
Upgrade Center and released VoIP channels)
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Authorizations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the InterCom (announcement/handsfree speaking) check box.
Enables InterCom permission.
Disables InterCom permission.
Further steps:
– Save your settings before you leave the page.
246
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
module or COMpact ISDN module
0