Configuring The Ringer Frequency - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
Ringer Rhythms

Configuring the Ringer Frequency

1 x long: 1 long tone (1 second), 4 second pause, ...
3 x short: 3 double tones, approx. 1 second pause, ...
1st special rhythm: Uninterrupted pulsing
2nd special rhythm: Continually repeating double tones (3 double tones in
5 seconds)
3rd special rhythm: 1 double tone, approx. 4 second pause, ...
4th special rhythm: 2 short tones, approx. 4 second pause, ...
5th special rhythm: 2 long tones, approx. 3 second pause, ...
6th special rhythm: 1 short and 1 long tone, approx. 4 second pause, ...
Further steps:
– Save your settings before you leave the page.
Configuring the Ringer Frequency
The ringer frequency indicates the ringer voltage frequency signals the PBX calls to the internal
analog subscribers.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page CONFIGURATION > Internal phone numbers > Analog
subscribers.
2. In the Rhythm frequency list field, select one of the following options:
25 Hz
50 Hz
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
475