Configuring The Authorization Id; Configuring The Connection Type For The Voip Account - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
VoIP

Configuring the Authorization ID

Configuring the Authorization ID
The authorization ID is allocated during account configuration by some VoIP providers and is
required to access the VoIP account.
Configuration can be carried out as follows:
• Separately for VoIP accounts
• Via the configuration manager
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in
the Upgrade Center)
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > External numbers.
2. In the list field at the top, select the VoIP connection in question.
A page opens for configuring the VoIP connection.
3. Open the page VoIP connection > Name and settings.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
4. In the list field at the top, select the account in question by its name.
5. Enter the authorization ID in the Authorization ID entry field.
Note: You may only enter anything in this field when an authorization ID has
been allocated by the VoIP provider.
Further steps:
– Save your settings before you leave the page.

Configuring the Connection Type for the VoIP Account

The connection type provided by the VoIP provider must be configured for the VoIP account.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
429