Powering Down; Powering The Pbx Down - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance

Powering Down

Powering the PBX Down

Powering Down
If it is necessary to separate the PBX from the electric current (pull the power plug of the PBX
out of the socket and also of the accessory equipment where required), the PBX will first have
to be powered down properly.
Powering the PBX Down
Powering down can be carried out as follows:
• Via the configuration manager
Important: When powering down the PBX, all of the connections to the Web
server, all calls and all data services are terminated. Unsaved data is lost.
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page SERVICE > Firmware update/restart > Restart/power down.
2. Click Power down under Power down of the PBX.
The PBX is powered down.
Further steps:
– As soon as the "Power" LED is lit in red, you can pull the power plug of the PBX and
accessory equipment – if required – out of the socket.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
537