Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 273

Configuring and Operating Functions
Music on Hold and Announcement
Recording and Configuring the Announcement for Music on Hold
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Music on hold/announcement > File and volume.
2. In the File list field, select the Announcement option.
3. Click Read under Read from PBX.
A file location dialog opens.
4. Select the desired location and click Save (this text is dependent on the operating
system used).
Setting the Volume of the Announcement for Music on Hold via the Configuration
Manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Enabled music on hold announcement
1. Open the page FUNCTIONS > Music on hold/announcement > File and volume.
2. In the File list field, select the Announcement option.
3. Slide the Volume slider under Settings or enter a value in the entry field next to the
slider. The following entries are possible:
0 to 100: The playback volume of music on hold announcement increases or
decreases, depending on the value entered.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
273