Saving Configuration Data On The Pc - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance
Backing Up and Recovering Configuration Data

Saving Configuration Data on the PC

Requirements:
– PBX set to factory settings
– The configuration file (auconfig.cfg) saved on a USB memory stick or SD card saved
Note: The configuration file must be named "auconfig.cfg".
1. Turn the PBX off.
2. Insert the USB memory stick into the USB port (USB host) or the SD card into the SD
card slot on the PBX.
3. Turn the PBX on.
The configuration data saved on the USB memory stick or on the SD card saved is
automatically saved in the PBX. Finally, restart the PBX.
If the "Power" LED lights up in green again, the restart is complete and the PBX is
ready for operation.
Note: If the "Power" LED remains continuously lit in red, an error has
occurred. Please contact your dealer or the manufacturer directly.
Saving Configuration Data on the PC
The saving procedure can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– For the settings Read network settings and Read PBX data: Expert view (click
1. Open the page SERVICE > Data backup > Save and read out configuration data.
Note: The saving procedure is also provided during the quick configuration
using the configuration wizard.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
509