Configuring and Operating Functions
Wake-up Functions
Recording, Saving and Listening to Wake-up Announcements
3. Click Browse (this text is dependent on the operating system used) under Store in
the PBX.
A file selection dialog opens.
4. Select the file you want and click Open (this text is dependent on the operating
system used).
The path and the file name are displayed in the field next to Browse.
5. Click Save.
6. Click OK.
Recording a Wake-up Announcement via an Internal Telephone
Up to three wake-up announcements can be recorded directly over the receiver of an internal
telephone. When recording a new wake-up announcement, the currently existing announ-
cement is overwritten directly.
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– A configured sub-admin PIN
1. Pick up the receiver.
2. Dial ##8.
3. Enter the sub-admin PIN.
4. Dial one of the following character strings:
*5621*: Selects announcement number one.
*5622*: Selects announcement number two.
*5623*: Selects announcement number three.
You will hear the confirmation tone.
5. To start recording the announcement, dial *.
6. Say the text you have prepared.
330
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11