Firmware Update; Firmware Update Variants; Initiating A Manual Firmware Update - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance

Firmware Update

Firmware Update Variants

Firmware Update
When firmware is updated, errors are corrected or new features are installed. To do this, the
device establishes a connection to a server in order to download the most current firmware (the
device settings remain intact). Except for the charges for the required server connection, the
update is free of charge.
Firmware Update Variants
There are various options for carrying out a firmware update. The variants are differentiated as
follows:
Manual Firmware Update
When a manual firmware update is carried out, a file (*.rom) is uploaded into the configuration
manager in the PBX thereby saving the new firmware in the PBX.
Instant Firmware Updates via the Update Server
When an instant firmware update is activated via the update server, the firmware update is
initiated automatically. After a connection to the update server has been established, the server
sends the latest firmware to the PBX.

Initiating a Manual Firmware Update

Initiation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– A firmware file (*.rom) saved on a data storage medium (PC)
Note: You can download the firmware file from the support pages at the
Auerswald web site (Internet address: www.auerswald.de).
500
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11