Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 281

Configuring and Operating Functions
Network Printer
Adding a Printer
or
Click Have Disk... to install the printer software from an installation medium (e.g.,
CD).
• Under Name Your Printer:
Enter a name for the printer in the Printer name entry field.
If you would like to set the printer as the default printer, select the Yes option.
• Under Printer Sharing:
If necessary, select the Share name option and enter a name in the entry field.
Adding a Printer under SUSE Linux
Requirements:
– A USB printer with the device class "printer" connected to the USB host and enabled
– Printer recognition by the USB host on the COMpact 3000
– Printer support through the printing software CUPS (Common UNIX Printing System)
1. Log in as "Superuser" on the computer.
2. Enter the following command into the console:
lpadmin -p <printer name> -E -v socket://<IP address of the PBX>:<Port> -
m <printerdescriptionfile.ppd>: e.g., lpadmin -p DesignJet 5000PS -E -v
socket://192.168.0.240:9100 –m hp5000c1.ppd for an HP DesignJet 5000PS
with the printer description file hp5000c1.ppd
Adding a Printer under Mac OS X
Requirements:
– A USB printer with the device class "printer" connected to the USB host and enabled
– The printer driver included in the printer service program (compatible printer drivers are also
possible)
1. Open the printer service program. First click Go and then Utilities. Double-click
Printer Setup Utility, and then click the plus symbol at the bottom left.
2. Click IP Printer.
3. In the Protocol list field, select the HP Jet Direct - Socket option.
4. Enter the IP address of the PBX in the Address entry field.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
281