Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 323

Configuring and Operating Functions
Wake-up Functions
Switching Wake-up On/Off
Note: On activated holidays, you can enable the wake-up call for a Sunday
instead using the wake-up call for that weekday.
5. Select or clear the Always check box.
Enables recurring wake-up.
Enables a one-time wake-up. Once the wake-up call has been carried out, it is
deleted.
6. Select the Activated check box.
Enables the wake-up call in question.
Further steps:
– Save your settings before you leave the page.
Switching Wake-up Off via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Entered wake-up time and wake-up enabled for the subscriber
1. Open the page PROPERTIES > Internal subscribers > Wake-up times.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Clear the Activated check box for the wake-up call in question.
Disables the wake-up call in question.
Note: The settings for the wake-up call are not deleted by switching off the
function. To delete all of the settings for the wake-up call, the entire entry must
be deleted.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
323