Configuring and Operating Functions
Exchange Line Transfer
Configuring Subscribers for the Charge Burden
Configuring Subscribers for the Charge Burden
It must be defined which of the two subscribers should be billed the charges for a call.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– System telephone COMfortel 1100/1500/2500/2500 AB/VoIP 2500 AB
– Internal S
port (only available on the optional COMpact S
0
module) or internal VoIP channels (COMpact 3000 VoIP or VoIP channels acquired in the
Upgrade Center and released)
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page FUNCTIONS > Transfer.
2. Select one of the following options in the Charge burden list field under Exchange
line transfer.
Transferring subscriber: The charges are billed to the transferring subscriber.
Requesting subscriber: The charges are billed to the requesting subscriber.
Further steps:
– Save your settings before you leave the page.
Configuring the Time Limit for Initiating an External Call
The time limit for initiating an external call indicates how many minutes the exchange line
access will persist at maximum if a call is not initiated successfully.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– System telephone COMfortel 1100/1500/2500/2500 AB/VoIP 2500 AB
– Internal S
port (only available on the optional COMpact S
0
module) or internal VoIP channels (COMpact 3000 VoIP or acquired in the Upgrade Center
and released VoIP channels)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
module or COMpact ISDN
0
module or COMpact ISDN
0
243