Targeted Exchange Line Access; Initiating Targeted Exchange Line Access - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions

Targeted Exchange Line Access

Initiating Targeted Exchange Line Access

Targeted Exchange Line Access
Using targeted exchange line access, you can define which of your own external phone number
is transmitted for an external call.
Initiating Targeted Exchange Line Access
Initiation can be carried out as follows:
• Using a character string on the internal telephone
• On the system telephone COMfortel 1100/1500/2500/2500 AB/VoIP 2500 AB using the
function key (see the telephone manual)
1. Pick up the receiver.
2. Dial ##96.
3. Enter the separate external telephone number to be transmitted. The following entries
are possible:
External phone numbers (independent of the configuration of the direct
exchange access)
4. Dial *.
5. Enter an external telephone number. The following entries are possible:
External phone number (If you do not use a direct exchange line access, dial
the exchange line access number before dialling the telephone number.)
** and short code number (If you do not use a direct exchange line access,
omit the **.)
The subscriber is called.
302
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11