Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 24

Important Information
Intended Use
• Analog telephone with pulse dialling
Important: Devices using pulse dialling cannot use the full range of features.
• Analog fax machine
• Analog answering machine
• Modem
• a/b door terminal system, e. g. TFS-Dialog 200/300, TFS-Universal a/b
Internal S Port (only provided at the optionally available modules COMpact S
0
and COMpact ISDN module)
An internal S port is suitable for connecting one of the following terminal devices:
0
• COMfortel 1100/1500/2500/2500 AB system telephone (as of firmware version 4.0B)
• COMfortel DECT 900/900C system telephone
• ISDN telephone in compliance with the Euro ISDN Standard (DSS1)
• ISDN PC controller in compliance with the Euro ISDN Standard (DSS1)
Important: The power consumption of the end devices on an S
total a maximum of 2.5 W.
Internal U Port (only provided at the optionally available COMpact ISDN module)
P0
An internal U port is suitable for connecting one of the following terminal devices:
P0
• COMfortel 1100/1500/2500/2500 AB system telephone (as of firmware version 4.0B)
All other devices can only be connected to the U
port with two Western sockets by converting 2-wire to 4-wire. It is suitable for connecting the
following terminal devices:
• COMfortel DECT 900/900C system telephone
• ISDN telephone in compliance with the Euro ISDN Standard (DSS1)
• ISDN PC controller in compliance with the Euro ISDN Standard (DSS1)
Important: The power consumption of the end devices on a U
total a maximum of 2.5 W.
24
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
port via a U /S adapter. It provides a S
P0 P0 0
module
0
port may
0
0
port may
P0