Searching In Help - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Using the Configuration Manager
Help

Searching in Help

Searching in Help
You can search the entire Help for one or more terms.
1. Click the Search tab (this text is dependent on the operating system used).
The tab is activated (it is highlighted in yellow). The left area of the help window
contains a input field for the keywords and a button for starting the search.
2. Enter the desired term in the entry fields.
Note:
The character * can be used as a placeholder (wildcard) in a search. A
search using Telef* results, e.g., in hits for telephone, telephoning and
telephone book.
If you enter several terms, the Help texts which contain all these keywords
will be displayed irrespective of the sequence and context.
3. Click Search (this text is dependent on the operating system used).
Help is searched; this may take some time. Afterwards, the topics that contain the
search term are listed. The sequence within this list is determined by the number of
hits and the importance of the search term found. The higher the value displayed
under in %, the more important the Help text is to the search.
4. Click the desired Title in the list.
The corresponding Help page will be opened on the right-hand side of the Help
window.
Note:
Some browsers, e.g., Internet Explorer 7, also highlight the identified search
terms within the Help text.
The search area and the selected page are separated by a vertical line or a
scroll bar. To enlarge the area (this automatically makes the other areas
smaller), click and hold the cursor above the separator line and slide the line
to the location you want. This setting only applies to the Help window
currently open.
By clicking the
open Help page in the table of contents.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
symbol in the Help window, you can display the currently
93