Configuring The Cost Per Call Unit - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Managing the Telephone Book and Lists
Call Data

Configuring the Cost per Call Unit

• COMpact 3000 ISDN: FUNCTIONS > Time and call allowance accounts >
Settings
2. Enter the desired abbreviation in the Currency name entry field. The following entries
are possible:
Up to 3 digits
Digits and characters
Further steps:
– Save your settings before you leave the page.
Configuring the Cost per Call Unit
The cost per call unit are used for internal calculations and the display.
The value entered here refers to the currency entered under Currency name (e.g., for the
Currency name EUR 0.0600 for 6 cents).
Note: For Least Cost Routing (LCR), the tariff information of call-by-call-
providers is saved in the PBX. This data (prices + metering pulse interval)
replace the cost per call unit entered here for all LCR calls.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with a sufficient authority level
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an
0
option)
1. Open the page FUNCTIONS > Time and call allowance accounts > Settings.
2. Enter a value in the Cost per call unit entry field. The following entries are possible:
Price in 00.0000 format: Specifies the cost per call unit from 0.0000 to 99.9999.
Digits and separator "," (comma)
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
141