Configuring and Managing the PBX
Internal Telephone Numbers
Creating VoIP Subscribers
Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the telephone number.
4. Select one of the following options from the Device type list field depending on the
device connected.
ISDN telephone: ISDN telephone in compliance with the Euro ISDN Standard
(DSS1)
ISDN system telephone: System telephone COMfortel 1100/1500/2500/
2500 TAM (as of firmware version 3.6C)
ISDN PC controller: ISDN PC controller in compliance with the Euro ISDN
Standard (DSS1)
DECT system telephone: COMfortel DECT 900 Base
Fax machine: ISDN fax machine in compliance with the Euro ISDN Standard
(DSS1)
5. Select the port to which the end device is connected from the Port list field.
6. Click
.
Note: The subscriber properties, wake-up times and a time account (or call
allowance account on a COMpact 3000 ISDN or on the COMpact ISDN
module available as an option) are configured on the page PROPERTIES >
Internal subscribers. Click
7. Repeat step 2 to 6 to enter additional telephone numbers.
Further steps:
– Save your settings before you leave the page.
Creating VoIP Subscribers
The VoIP subscribers are on the end devices for which internal telephone numbers are
allocated and that are connected to the Ethernet port. The telephone numbers are used to
access the end devices via the PBX (internal IP telephony).
A total of up to eight VoIP subscribers can be created.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
to switch directly to this page.
353